A channel manager is the software that sends how many of your hotel's rooms are for sale on which date, and at what rate, to every channel at the same time: booking.com, Expedia, Airbnb, tour operators and the hotel's own website. It also works in the other direction: it brings reservations from these channels into your hotel software and closes the sold room on the other channels. Even for a 20-room hotel selling on three channels, updating three panels by hand for every reservation takes hours and leads to the same room being sold twice. This guide explains how a channel manager works, the mapping step where most setup mistakes are made and what to watch in daily use.

What you will learn in this article
  • A channel manager sends availability, rates and restrictions to channels and brings incoming reservations into the hotel software; if the two do not work together, the overbooking risk remains.
  • The most critical setup step is mapping room types and rate plans; a wrong mapping means selling the wrong room or at the wrong rate.
  • If the channel manager is connected directly to the hotel software, every cancellation, extension and room closure made at the front desk reaches the channels on its own.

What exactly does a channel manager do?

A channel manager has a two-way job. In the direction from the hotel to the channels it sends availability (how many rooms of each type can be sold), rates (for each date and rate plan) and restrictions (such as minimum stay, closed to arrival and closed to sale). In the direction from the channels to the hotel, new reservations, modifications and cancellations come in.

Here is an example. Your hotel has 6 Standard Double rooms and 2 have been sold for 14 June. The channel manager sends 'Standard Double, 14 June, 4 rooms' to every channel. When a reservation arrives from booking.com, the number drops to 3, and this new number reaches Expedia, your own website and the other channels within seconds. The same happens when the front desk sells a room by phone.

  1. 1Room planStandard Double: 4 rooms free
  2. 2Channel managerSends the number to every channel
  3. 3The channelsBooking.com, Expedia, your own website
  4. 4Reservation1 room is sold on one channel
  5. 5Update3 rooms remain on every channel
What happens when a reservation comes in?

The relationship between the channel manager and the hotel software

A channel manager on its own is not hotel software; where it takes availability from matters. With a channel manager that works independently of the hotel software, availability is kept in a separate panel and the front desk has to update every phone reservation, every cancellation and every out-of-order room in two places. Every forgotten update means either an empty room that was not sold or a room sold twice.

With a channel manager connected directly to the hotel software, the source of availability is the room plan itself. When a reservation is cancelled at the front desk, a guest extends by one night or a room is taken off sale because of a fault, the number on the channels updates on its own. A reservation from a channel also lands directly on the room plan.

The most important setup step: mapping

Every channel has its own room type and rate plan names. A room sold on booking.com as 'Deluxe Double Room with Sea View' may be 'Sea View Double' in your software. The channel manager has to link the two. Rate plans are mapped the same way: every plan, such as breakfast included, non-refundable, bed and breakfast or half board, must find its counterpart on the channel.

A wrong mapping is the most expensive mistake. If the sea view room is mapped to a rear-facing room, a problem starts with a guest complaint and continues with a rate difference. If the breakfast-included plan is mapped to the room-only rate, revenue is lost on every reservation. Before going live, check every mapping one by one with a test reservation.

  • Every channel room type is linked to the correct room type in the software.
  • Every rate plan (non-refundable, breakfast included, half board) is mapped to the correct plan.
  • Occupancy and child pricing look correct on the channel.
  • At least one test reservation was made and cancelled for each channel.

Why does overbooking happen and how do you prevent it?

Even with a channel manager, overbooking happens in two situations. The first is when the same last room is sold on two channels within the same seconds. This is rare and usually depends on the channel manager's speed. The second, much more common, is availability reaching the channel manager incompletely or late: a sale made at the front desk that was not entered into the channel panel, an out-of-order room not taken off sale, or the channel connection being down for a while.

To prevent it, availability should come from a single source, the hotel software, and connection errors should not stay hidden but appear on screen. Some hotels pull the last one or two rooms from the channels in busy periods and keep them for direct sales only. This also saves channel commission.

Rates and restrictions

Not just rates but sales rules are sent from the channel manager. Minimum stay (for example at least 3 nights during a holiday week), closed to arrival (no arrivals that day, though stays can continue), closed to departure and closed to sale (stop-sell) are the most common. Defining these rules once in the software and sending them to every channel, rather than entering them into each channel panel one by one, saves time and prevents inconsistency between channels.

Watch rate parity too. If the rate on your own website is higher than on an OTA for the same room and plan, guests will not book direct; conversely, some OTA contracts limit rate differences. Defining a percentage increase or discount per channel in the channel manager makes this balance easier to set.

What to check in daily use

Once set up, the channel manager runs by itself, but not without anyone looking. Checking two lists every morning is enough: reservations that could not be imported and updates that could not be sent. A reservation that could not be imported usually comes from a room type or rate plan without a mapping; once fixed and re-imported, it lands on the room plan. An update that could not be sent means wrong availability is left on a channel.

  • The queue of reservations that could not be imported is empty.
  • There is no recent sending error, or it has been resolved.
  • On busy dates, availability on the channels matches the room plan.
  • The revenue and commission report per channel was reviewed once a month.

The RoomFollow channel manager

In RoomFollow, the channel manager is inside the hotel software. Availability goes straight from the room plan; cancellations, extensions, blocks and fault reports at the front desk reach the channels on their own. A reservation from a channel first opens in a preview, where the room type and rate plan mapping is confirmed; import errors are collected in a separate list and a duplicate reservation check prevents double records. With the sales and commission report per channel you see which platform really earns you money.

Short answers

FAQ

Are a channel manager and hotel software the same thing?

No. Hotel software (PMS) runs all of the hotel's daily work; a channel manager distributes availability and rates to online channels and receives the reservations that come from them. Ideally the two work in the same system or are connected directly.

Does a channel manager prevent overbooking completely?

It greatly reduces the risk, but if availability reaches it incompletely or late, overbooking can still happen. Availability coming from a single source, the hotel software, is the most important safeguard.

Which channels can it connect to?

Channel managers usually connect to large OTAs such as booking.com, Expedia, Airbnb, Agoda and Hotelbeds and to tour operators. The list of available channels varies by provider; ask about the channels you use at the start.

What happens to existing reservations when you switch to a channel manager?

Existing reservations on the channels stay where they are. During the switch, future reservations are transferred to the hotel software, availability is calculated from them and sent to the channels. The new connection should not be opened before the old one is closed.